It is possible to use the wrong size and type of air conditioning unit, and that may be contributing to your problem. You should make sure that the condenser coil is working properly.
If it is not working, you can contact a service technician who can come to inspect your system and make any necessary adjustments. You may need to replace your compressor as well. In order to check the proper operation of the system, you will need to remove the condenser coil cover.
To do that, you’ll need to loosen the screws with a Air conditioner repair atlanta screwdriver. After removing the cover, you should look inside and see that the fins inside are clean. Make sure that the air flows freely throughout the coils.
It is also important to check that the evaporator coil is full of water. A full coil will cause the cooling units to work harder, which means that you may have to change the evaporator fan or install new blades.
If your air conditioning system isn’t functioning properly, you should call a service professional for help.
A clogged or blocked condenser coil could be the problem. If you don’t know if your condenser fan is operating correctly, the first thing to look at is the condensing coil. This is what actually pulls the heat from the outside into your home. It works the same way as a stovetop hood vent. It takes hot air in through the top and forces it through the coils in the bottom. When a clog forms in the vent, the temperature of the air doesn’t decrease until the fan starts again, thus reducing the efficiency of your air conditioner.
If your home’s condensing coil is clogged, you can use a hair dryer to unclog it. Turn it on with a little bit of warm water. Let the coil slowly dry with the hair dryer off, and then restart the unit. This usually cleans the vent out in short order.
A clogged or blocked condenser coil can cause a serious safety hazard if your furnace is still operating. If you smell smoke or odors, call your local fire department. There could be a fire.
You might also want to check the fan blades. You can also open your attic door. Look at the fan blades while it’s running to see if they are moving.
A clogged or blocked condenser coil could be the problem. If you don’t know if your condenser fan is operating correctly, the first thing to look at is the condensing coil. This is what actually pulls the heat from the outside into your home. It works the same way as a stovetop hood vent. It takes hot air in through the top and forces it through the coils in the bottom. When a clog forms in the vent, the temperature of the air doesn’t decrease until the fan starts again, thus reducing the efficiency of your air conditioner.
If your home’s condensing coil is clogged, you can use a hair dryer to unclog it. Turn it on with a little bit of warm water. Let the coil slowly dry with the hair dryer off, and then restart the unit. This usually cleans the vent out in short order.
A clogged or blocked condenser coil can cause a serious safety hazard if your furnace is still operating. If you smell smoke or odors, call your local fire department. There could be a fire.
You might also want to check the fan blades. You can also open your attic door. Look at the fan blades while it’s running to see if they are moving.
Comments are closed.